Much has been written about the compatibility of various brands and types of slot cars working other brands and kinds of monitors. It is relatively well recognized, as an example, that almost any analog slot car can work well on a Carrera analog track because Carrera has the widest and deepest slot of some of the significant manufacturers. Alternatively, numerous Carrera cars will not work well, or whatsoever, on many other brands of track as the guide is too wide or strong to fit in something like Track Fans TV!. While posts have been written concerning the vehicles compatibility, little has been written about track retaining walls or obstacles. This study will appear in depth at tracks, retaining walls, and obstacles from Carrera, Ninco, and Scalextric, and also show how well they do, or don’t, work when combining brands.
First of all, let’s begin with Scalextric monitor and barriers, since they are quite likely probably the most commonly used brand of commercially produced slot car techniques. Scalextric will make a good searching barrier, made from a soft, flexible plastic material that keeps its type well, and can soak up impacts of slot vehicle accidents without having actual physical damage. These barriers can attach to Scalextric Sports activity monitor in several methods- with little dark clips that affix right to the bottom of the monitor, or inserted into lines and channels especially for these obstacles in the item shoulder joint pieces. As the obstacles do fit well and relatively stiffly to the black clips, the clips usually do not remain attached strongly for the track without using adhesives or any other methods of affixing them in a more long term style to the track. Also using a serious effect, either the buffer, or at times the whole shoulder joint area may dislodge from your monitor. Aesthetically the barriers are extremely pleasing, and they also do small injury to the cars whilst slowing or stopping them. However, they often times have to be put back into place right after incidents.
Carrera at the same time provided two different types of obstacles- a single was actually a smooth, flexible rubber that would slip into clips and affix to the monitor, and was available in dark or red. These are no longer produced. The current Carrera barrier program is made up of red and white striped “candy cane” part of 3mil PVC that slides into firmly fitted vinyl clips that attach to the foot of the track. The red-colored and white-colored striping suits the design found on the boundary and shoulder pieces of Carrera monitor, and does look appropriate on razor-sharp turns, though significantly less so on straight parts when a buffer may be warranted, such as a link. Also, the Pvc material is likely to become brittle as time passes, and will break and break with subsequent effects. In addition, it has almost no pliability, and definately will pick up paint from wayward vehicles. This tends to put in a realistic look to the barrier, however the vehicles will show warning signs of wear. This technique does stay strongly affixed towards the monitor even with severe effects. The pieces of Pvc material can additionally be easily reduce to custom measures, and one piece can be as long as 4 feet, permitting a constant look and feel over a long turn. It is also quite easy to create your own custom barrier wall surfaces by publishing directly to sheets of PVC and reducing it into strips in the proper elevation. This can enable the creation of practical and fairly long lasting trackside advertising.
Though not as widespread as Carrera and Scalextric, Ninco makes outstanding monitor and barrier items that are nearly globally recognized as the very best quality mass produced systems. The track has nearly the identical width and level since the Carrera, whilst having the versatility and aesthetics in the Scalextric. The barriers include low walls, stone searching wall surfaces, and even a wall with a high fencing. The Ninco obstacles are of a similar materials for the Scalextric types, and absorb effect without having “trading paint”
Now, assume you might have one type of track, but you would like to make use of an additional brand to get a wall or buffer. Thankfully, this is not as complicated or difficult a compatibility problem because it is with all the vehicles. The elevation in the Carrera PVC pieces is identical to the elevation involving the top and base rails in the Scalextric buffer railings, in fact it is quite simple to get rid of the Carrera chocolate-cane pieces and change all of them with Scalextric guardrails. The Carrera fastening system for the Carrera monitor is quite safe, as well as the bxutsr remain in place as well or much better using the Carrera clips on Carrera monitor because they do using Scalextric clips on Scalextric monitor. Lengths may become a minor problem, but the material trims effortlessly using a power blade. Unfortunately, if you would like make use of the Carrera “chocolate cane” on the Scalextric track, the best way to practice it well is by using an sticky, laying the Carrera strips over the Scalextric guard side rails. Hot glue works well for this particular, and can be eliminated fairly easily as well.
The Ninco obstacles and wall surfaces certainly are a one piece program, using the clips being an element of the wall or buffer section. These affix easily to not only the Ninco monitor, but also the Carrera and Scalextric. In reality, the Ninco items appear to install even much more tightly with all the Scalextric monitor than on their native track. In the Carrera track, the elevation from the track is just slightly higher compared to the space between the top and bottom from the Ninco clips. However, it can be produced to fit by trimming the edge of the Carrera track really slightly, almost unnoticeably across the base. Once again, the Carrera candy cane can be attached towards the Ninco barriers with the use of adhesives.